Philips FWP3200 - Product Information and Specifications; General Product Information; Technical Specifications; USB Playability Details

17
English
EN
8 Product
information
Note
•
Product information is subject to change without prior
notice.
Specications
Amplier
Rated Output Power 300 W RMS Max
Power
FrequencyResponse 35 Hz - 20 kHz, - 3 dB
Signal to Noise Ratio > 70 dB
Tuner (FM)
Tuning Range 87.5 - 108 MHz
Tuning grid 50 KHz
Sensitivity - Mono, 50
dB S/N Ratio
18 - 22 dBf
Total Harmonic
Distortion
> 2.0 %
Signal to Noise Ratio > 50 dB
Speakers
Speaker Impedance Treble: 6 ohm
Bass: 4 ohm
General information
AC power 110 - 240V ~,
50/60Hz
Operation power
consumption
44 W
USB direct Version 2.0/1.1
Dimensions
(W x H x D) 704 x 385 x 364 mm
Weight
- With Packing
- Main Unit
17.53 kg
14.49 kg
USB playability information
Compatible USB devices:
• USBashmemory(USB2.0or
USB1.1)
• USBashplayers(USB2.0orUSB1.1)
• Memorycards(requiresanadditional
card reader to work with this unit)
Supported formats:
• USBormemoryleformatFAT16,
FAT32 (sector size: 512 bytes)
• MP3 bit rate (data rate): 32-320 Kbps
and variable bit rate
• Directory nesting up to a maximum of
8 levels
• Number of albums/ folders: maximum
255
• Number of tracks/titles: maximum 999
• ID3 tag v2.0 or later
• File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
• Empty albums: an empty album is an
album that does not contain MP3/
WMAles,andwillnotbeshownin
the display.
• Unsupportedleformatsareskipped.
For example, Word documents (.doc)
are ignored and not played.
• AAC,WAV,PCMaudioles
• WMAles