Philips FX15 - Powering On and Standby Mode Management

10 EN
Turn on
• Press .
» The unit switches to the last selected
source.
Switch to standby mode
• Press again to switch the unit to normal
standby mode.
» The clock (if set) is displayed on the
panel.
To switch to ECO Power standby mode:
• Press and hold
for more than two
seconds.
» The display panel is dimmed.
» The ECO power indicator on the left
of the display panel lights up red.
Note
•
The unit switches to Eco Power standby mode after 10
minutes in standby mode.
To switch between normal standby mode and
ECO Power standby mode:
• Press and hold
for more than two
seconds.