EasyManua.ls Logo

Philips GC4340 - Iron Features and Functions; Delicate Fabric Protector; Spray Function; Concentrated Shot of Steam

Philips GC4340
62 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Always place and use the iron and the stand, if provided, on a
stable, level and horizontal surface.
Do not put perfume, vinegar, starch, descaling agents, ironing aids
or other chemicals in the water tank.
This appliance is intended for household use only.
Before first use
C
1 Remove the heat-resistant protective cover from the soleplate
(GC4340 only). Remove any sticker or protective foil from the
soleplate.
B
The iron may give off some smoke when you use it for the first time.This
will cease after a short while.
Preparing for use
Filling the water tank
Never immerse the iron in water.
1 Make sure the appliance is unplugged.
C
2 Set the steam control to position 0 (= no steam).
3 Open the cap of the filling opening.
4 Tilt the iron backwards.
C
5 Fill the water tank with tap water up to the maximum level by
means of the filling cup.
Do not fill the tank beyond the MAX indication.
Do not put perfume, vinegar, starch, descaling agents, ironing aids or
other chemicals in the water tank.
If the tap water in your area is very hard, we advise you to mix it
with an equal portion of distilled water, or to use distilled water
only.
C
6 Close the cap of the filling opening ('click').
ENGLISH 7

Other manuals for Philips GC4340

Related product manuals