Why is my Philips Iron dripping water after I unplug it?
If water drips from the soleplate of your Philips Iron after it has been unplugged or stored, set the steam slider to the dry setting. This should prevent further dripping.
Identifies and lists all parts of the Philips Azur Performer Plus iron.
Read safety leaflet and user manual carefully for future reference.
Step-by-step guide on how to fill the water tank with tap or distilled water.
How to use the spray function to remove stubborn creases effectively.
Using the steam boost for powerful steam to tackle difficult creases.
How to apply extra steam during ironing by holding the steam boost trigger.
Using the steam boost function vertically for hanging clothes or curtains.
How to select ECO mode for energy saving or dry ironing.
Instructions on how to clean the iron's soleplate and body.
Important information about the Quick Calc Release function.
To Next Page
General