EasyManuals Logo

Philips GC92 series User Manual

Philips GC92 series
154 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
on the control panel. This light ashes after about a month or 10 ironing
sessions. When this light ashes, perform the descaling procedure with
the EASY DE-CALC knob by following the steps below.
Never remove the EASY DE-CALC knob when the steam generator
is hot.
1 Press the on/off button to switch off the steam generator and
remove the plug from the wall socket.
2 Let the steam generator cool down for 2 hours.
3 Place the steam generator on a stable table top, with the EASY DE-
CALC knob over the edge of the table top.
Tip: You can also take the steam generator to a sink and place it so that the
EASY DE-CALC knob is pointing towards the sink.
4 Hold a cup of at least 350cc under the EASY DE-CALC knob to
collectthewaterthatowsout.
5 Turn the EASY DE-CALC knob anti-clockwise to remove it and let
thewaterwithscaleparticlesowintothecup.
Note: Water starts to ow out of the steam generator as soon as you turn the
EASY DE-CALC knob to remove it.
Note: This steam generator is specially designed to remove scale together
with the water easily and effectively. It is not necessary to shake or tilt the
steam generator.
6 When no more water comes out of the steam generator, reinsert
the EASY DE-SCALE knob and turn it clockwise to fasten it.
7 Put the mains plug in an earthed wall socket and press the DE-CALC
reset button to reset the EASY DE-CALC function. The DE-CALC
light goes out.
Cleaning the soleplate
Clean the soleplate regularly to remove stains from the soleplate.
1 Put the mains plug in an earthed wall socket and press the on/off
button to switch on the steam generator and let it heat up.
2 After approx. 2 minutes, press the on/off button again to switch off
the steam generator and remove the plug from the wall socket.
3 Place a piece of moist cotton cloth on the ironing board.
4 Iron over the cotton cloth repeatedly to remove stains from
the soleplate.
Storage
1 Press the on/off button to switch off the steam generator and
remove the plug from the wall socket.
2 Remove the detachable water tank and empty it.
3 Place the iron on the iron platform.
ENGLISH 11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips GC92 series and is the answer not in the manual?

Philips GC92 series Specifications

General IconGeneral
BrandPhilips
ModelGC92 series
CategoryIron
LanguageEnglish

Related product manuals