5 Press and hold the steam trigger to start steam ironing.
Steam boost function
You can use the steam boost function to remove stubborn creases.
1 Press the steam boost button.
Never direct steam at people.
Note: Some water droplets may come out of the soleplate when you use the
steam boost function for the rst time. This stops after you have used the
steam boost function for some time.
Vertical steam ironing
Hot steam is emitted from the iron. Never attempt to remove creases
from a garment that is worn. Do not apply steam near your or someone
else’s hand.
1 Hang the garment on a clothes hanger and pull the garment tight
with one hand.
2 Hold the iron in vertical position with the other hand and press the
steam trigger to steam the garment.
3 Touch the garment lightly with the soleplate of the iron to remove
creases.
4 Use the steam boost button together with the steam trigger to
successfully remove stubborn creases.
The steam generator automatically switches off when it has not been
used for a while (approx.10 minutes) and the auto-shut-off light in the on/
off button starts to ash. To activate the steam generator again, press any
button on the steam generator. The steam generator starts to heat
up again.
Cleaning and maintenance
To prevent scale build-up inside the steam generator and to ensure long-
lasting steaming performance, this steam generator has a DE-CALC light
ENGLISH10