Philips HD8651 - Automatic Rinse;Self-Cleaning Cycle

ENGLISH 13
2
Turn the control dial to the " " position.
3
When water dispensing stops, the “ ” light  ashes slowly. Turn the
control dial to bring it back to the "
" position. The machine is in
warm-up mode and the "
" light  ashes slowly.
Automatic Rinse/Self-Cleaning Cycle
When warm-up has been completed, the machine automatically performs
a rinse/self-cleaning cycle of the internal circuits with fresh water. This
takes less than a minute.
1
Place the container under the co ee dispensing spout to catch the
small amount of water which will be dispensed.
2
The " " light  ashes slowly.
3
Wait for the cycle to  nish automatically.
Note:
You can stop the dispensing process by pressing either the "
" or the "
" button.
4
Wait for water dispensing to stop. The “ ” light shines steadily.
Flashing
Steady on