14
ENGLISH
Manual Rinse Cycle
During this process you activate the co ee brewing cycle and fresh water
ows through the steam/hot water circuit. This takes a few minutes.
1
Place the container under the co ee dispensing spout.
2
Check that the “ ” light is steady on.
3
Press the “ ” button. The machine starts brewing co ee.
4
Wait until brewing has been completed and empty the container.
5
Place a container under the steam/hot water wand (Classic Milk
Frother, if supplied).
6
Turn the control dial to the " " position. The " " light ashes slowly.
7
Dispense all the remaining water. The " " light shines steadily.
Steady on
To Next Page
Loading...
