ENGLISH
25
DISPENSING HOT WATER
Warning:
Danger of burning! Dispensing may be preceded by small jets of hot
water. The steam/hot water wand may reach high temperatures: never
touch it with bare hands. Use the appropriate protective handle only.
1
Before dispensing hot water, check that the “ ” light is steady on. If
the light ashes slowly, wait for the machine to heat up.
2
Place a cup under the steam/hot water wand (Classic Milk Frother, if
supplied).
3
Turn the control dial to the " " position. The " " light ashes slowly.
The machine is in its warm-up phase and dispenses hot water after a
few seconds.
4
To stop hot water dispensing, turn control dial back to the “ ” position.
The "
" light shines steadily.
Steady on
To Next Page
Loading...
