ENGLISH
33
2
Empty the drip tray and place it back, then remove the Classic Milk
Frother and the “Intenza+” water lter (if any).
3
Remove and empty the water tank. Pour in the entire content of
the Saeco descaling solution. Fill the water tank with fresh water
up to the MAX level. Put the water tank back into the machine.
H
2
O
MAX
4
Turn the control dial to the “ ” position and place a large container
under the steam wand and co ee dispensing spout.
Note:
During the descaling process. the coff ee grinding function is disa-
bled. Therefore, only water will be dispensed if the espresso button is
pressed.
To Next Page
Loading...
