Philips HD8827 - Machine Operation; Rinsing Procedures

Circuit priming
During the initial heat-up process, fresh water flows through the internal
circuit to heat up the machine. This takes a few seconds.
1 Place a container under the classic milk frother.
Espresso
Memo Memo Memo
Calc
clean
Espresso lungo Coee
2 The no water and general warning lights flash simultaneously.
-
The ESPRESSO button lights up.
Aroma plus
Hot water
Steam
Espresso
Memo Memo Memo
Calc
clean
Espresso lungo Coee
Espresso
Memo
3 Press the Espresso button.
-
The machine is heating up and the ESPRESSO, ESPRESSO LUNGO
and COFFEE buttons flash simultaneously.
Automatic rinsing cycle
When the machine has heated up, it performs an automatic rinsing cycle to
clean the internal circuit with fresh water. During the cycle water flows from
the coffee spout.
1 Place a container under the coffee dispensing spout.
Aroma plus
Hot water
Steam
Espresso
Memo Memo Memo
Calc
clean
Espresso lungo Coee
-
The ESPRESSO, ESPRESSO LUNGO and COFFEE buttons flash
simultaneously.
-
The cycle ends automatically.
10
English