EasyManua.ls Logo

Philips HD8834 - Adjusting the Frothed Milk Length

Philips HD8834
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
ENGLISH
FROTHING MILK
Warning:
Danger of burning! Dispensing may be preceded by jets of milk and
steam. Danger of burning!
Wait until the end of the cycle before removing the milk carafe.
1
Fill the carafe with milk. The milk level must be between the minimum
(MIN) and maximum (MAX) level indicators shown on the milk carafe.
Note:
Use cold (~5 °C / 41°F) milk with a protein content of at least 3% to ensure
optimum results when preparing a cappuccino. Whole milk, skimmed milk,
soy milk or lactose-free milk may be used depending on individual taste.
4
Place a cup under the dispensing spout.
2
Insert the carafe into the machine.
3
Pull out the carafe dispensing spout to the right up to the icon.
Note:
If the carafe dispensing spout has not been pulled all the way out, milk
may not be properly frothed.

Table of Contents

Related product manuals