46
ENGLISH
2
Remove the lid.
A
B
3
Lift the dispensing spout to remove it from the top of the carafe. The
carafe dispensing spout is made up of six parts that must be disassem-
bled. Each part is indicated by a capital letter (A, B, C, D, E, F), as shown
in the gures below.
4
Remove the suction tube with the tting (A) from the milk frother.
5
Remove the tting (B) from the suction tube.
C
6
Detach the lid (C) from the carafe dispensing spout by pushing down-
wards while slightly pressing on the sides.
To Next Page
Loading...
