PHILIPS MEDICAL SYSTEMS
C-2
SETUP
Setup. Setup has been lost from memory; factory
default setup is being used. Contact Medical Director
for revised setup.
REV: XXX X.X
XXXX
Software. The version of software used in your
HeartStart FR2+.
Flashing black hourglass. Ready for use.
Solid red X. Not ready for use. (See Chapter 4,
“Maintaining, Testing, and Troubleshooting.”)
Flashing red X. Troubleshooting required. (See
Chapter 4, “Maintaining, Testing, and
Troubleshooting.”)
Meets the requirements of the European medical
device directives 93/42/EEC.
Meets the requirements of the applicable European
directive.
This product has passed relevant safety tests by CSA, a
nationally recognized test lab.
This product has been certified by the Australian
Communication Authority.
Authorized representative in the European
Community.
Refer to operating instructions.
Manufacturer.
Printed on recycled paper.
symbol description
To Next Page
Loading...