PHILIPS MEDICAL SYSTEMS
C-1
C
C GLOSSARY OF SYMBOLS AND CONTROLS
The following table explains the symbols used on the HeartStart FR2+
Defibrillator, its accessories, and their packaging.
symbol description
On/Off button. Turns the HeartStart FR2+ on or off;
disarms HeartStart FR2+, stops automatic selftest.
When the optional Training & Administration Pack is
being used in the Training function, this button is used
to select and exit training scripts.
Shock button. Delivers shock to patient when the
HeartStart FR2+ is charged.
Upper and lower Option buttons.
Allow you to move
around in and select an item from a display menu,
provide adjustment of display screen contrast. Permit
access to advanced mode, if so configured.
Defibrillation protection. Defibrillation protected, type
BF patient connection.
High voltage.
IP54 With data card tray and battery installed, meets IEC
529 class IP54.
HR XXX Heart rate.
XX
Number of shocks delivered.
XX:XX Time (minutes:seconds). How much time has passed
since the HeartStart FR2+ was turned on.
TEMPERATURE
Temperature. Recommended storage temperature
range has been exceeded since the last battery
insertion selftest.
To Next Page
Loading...