Philips HeartStart OnSite - Setting Up and Preparing the HeartStart Onsite; Package Contents and Initial Setup

PHILIPS MEDICAL SYSTEMS
2-1
2
2 SETTING UP THE HEARTSTART ONSITE
PACK AGE CONTENTS
Check the contents of the HeartStart OnSite Defibrillator M5066A box to be
sure it contains:
• 1 HeartStart OnSite Defibrillator
• 1 battery M5070A, pre-installed
• 1 Adult SMART Pads Cartridge M5071A, containing one set of adhesive
defibrillation pads, pre-installed
• 1 Quick Reference Guide
• 1 Owner’s Manual
• 1 HeartStart Quick Setup Guide
• 1 inspection log/maintenance booklet with plastic storage sleeve and
maintenance tags
*
If you have purchased the OnSite Ready-Pack configuration, the OnSite is
installed in a carry case, which also contains a spare adult SMART Pads
Cartridge.
Training materials and optional accessories for the HeartStart are also available
from Philips. See Appendix A for information.
SETTING UP THE HEARTSTART ONSITE
Setting up the OnSite is simple and quick. The HeartStart Quick Setup Guide
provides illustrated instructions for setup, which is described in detail below.
1. Remove the OnSite from its packaging. Check that the battery and pads
cartridge are installed.
†
* In Japan, the defibrillator comes with a different style of maintenance tag and
inspection log/maintenance booklet.
† If the battery and pads are not installed, or if you wish to install an infant/child
SMART Pads Cartridge, follow the directions in Chapter 4, “After Using the
HeartStart” to install the pads and battery.