EasyManua.ls Logo

Philips HL1659/28 - Introduction and Safety Guidelines; Essential Safety Precautions

Philips HL1659/28
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.0 Introduction
1.1 Philips brings to you, yet another
unique collection of products called
Philips Intelligent Mixer Grinder
(HL 1650), Philips Intelligent Mixer
Grinder with timer (HL 1651), Juicer
Mixer Grinder (HL 1654) and Philips
Intelligent Food Processor
(HL 1659), which showcase
exemplary features that make
your life more convenient and
contemporary.
1.2 They come with an Intelli Arm
that completely assures the locking
mechanism of the jar’s lid. An Intelli
Control that sets the time for the
machine and gives a lock feedback
and auto shutoff feature, which
ensures that the machine shuts off
automatically once the set time is
over. These distinct features give you
total freedom, to leave the machine
and do your work at ease.
1.1 Important
We strongly recommend that you read the
following instructions carefully, before using the
appliance and save them for future reference:
Check if the voltage indicated on the base
of the appliance, corresponds to the local
electrical mains voltage, before you connect
the appliance
Always use a properly earthed electrical
connection
Do not use the appliance when the mains
cord, the plug or other components are
damaged
If the mains cord is damaged, do not use
the appliance and contact the nearest
Philips service centre
This appliance is strictly for household use
Keep the appliance out of children’s reach
Never use accessories or parts that are not
recommended by Philips or made by other
manufacturers
Your guarantee will become invalid, if you
use such parts or accessories
Check sieve, fruit fi lter and blades every
time you want to use the appliance. If you
detect any cracks or damage, do not use
the appliance and contact the nearest
Philips service centre
Make sure all parts are correctly mounted
before you switch on the appliance
Only use the appliance when jar and arm
are locked
Do not remove the pulp container when
the appliance is in operation (HL 1654)
Do not touch the small cutting blades in the
base of fi lter (HL 1654)
For application times, see the table on
instructions for use manual
Thoroughly clean the parts that will come
in contact with food before you use the
appliance for the fi rst time
Do not exceed quantities and preparation
times indicated in the table
Switch off the appliance and disconnect for
supply before detaching any accessory or
approaching parts that move in use
Always switch off the appliance by turning
the speed knob to zero position
Always unplug the appliance after use
Never immerse the motor unit in water or
any other liquid. Do not rinse it either
Never lift the product holding the arm or its
guide
Never forcefully lift the appliance without
releasing the vacuum using the lever
(Fig.58, HL 1659)
• Do not use the jars as storage containers
During food processing/juicing operation,
never use your fi ngers or an object (E.g.
spatula) to push ingredients down the feed
tube while the appliance is running. Only
the pusher is to be used for this purpose
(HL 1654, HL 1659)
Always unplug the appliance before
reaching into any jar including juice collector
Always ensure that the speed selector knob
is at ‘0’ position, before fi xing accessories for
liquidizing/blending, use speed 1 only
Keep Mixer away from hot gas burner or
electric hot plate or similar appliances
Do not use Mixer on wet surface
Use Mixer on smooth surface without any
gaps for effective vacuum grip
For non-timer versions, do not use Arm
or accessories as switch, to start/stop the
appliance
Never try to remove accessories without
pressing the ‘button to unlock accessories’

Related product manuals