5. While fi xing the arm on the jar, ensure
that the groove in arm, matches with the
circular ring on lid (Fig. 14)
6. Turn the speed selector to the required
position. Select the speed to suit the
recipe (Fig. 15)
7. After operation, turn selector knob to
‘Off ’ position (Fig. 16)
8. For pulse, turn speed selector knob
anticlockwise from ‘0’ position gently
9. Pull the arm in upward direction. Press
the button to move the arm upwards
(Fig. 17)
10. Finally press the button to unlock the jar
(Fig. 18)
3
6.2 Mixer grinder with timer (HL 1651)
1. Connect the main plug to the wall socket
(Fig. 19)
2. Switch on the main supply
3. LED display will show
--
:
--
indicating the
power supply is on (Fig. 20)
4.
Fix the jar on the motor unit, with the help
of the arrow on the jar collar and motor
unit. The LED display will change to 00:
--
(Fig. 21)
5. Fill the jar with the ingredients and put the
lid (Fig. 22)
6. Fix the arm on the jar. The LED display will
change to 00:00. This indicates that the
appliance is ready to use (Fig. 23)
7. Default mode of the operation is ‘Auto.’ To
go on to the Manual mode, press the mode
button. The LED display will now change
(Fig. 24)
8. Set the time using Up and Down arrows.
Maximum time that can be set is 30
minutes (Fig. 25)
Note: The appliance will auto shutoff after 5
minutes (Auto mode) and 3.5 minutes (Manual
mode) of continuous operations, to avoid any
unforeseen situation. In case, the appliance
doesn’t start within 5 minutes after setting the
time OR stops in between, and is not restarted
within 5 minutes, the display will reset to 00:00
9. Turn the speed selector knob to the
required position. Select the speed to suit
the recipe (Fig. 26)
To Next Page
Loading...
