Philips HR2345 - Assembling the Pasta Maker; Assembly Safety Reminder; Assembly Steps 1-3

16

English
Important
Assembling
Follow below assembling steps to install
the Pasta maker.
1 Slide the mixing chamber onto the main unit.
Note:
• Make sure the fixing levers on the main
unit are fitted with the openings on the
bottom of the mixing chamber.
2 Put the mixing paddle in the mixing chamber as
shown in the illustration.
3 Insert the squeezing tube into the mixing
chamber.
Note:
• Make sure the big opening on the squeezing
tube faces up when you insert the tube into the
chamber.
1
• Make sure the appliance is not plugged in during assembly.