What does E2 error mean on my Philips HR2381?
If your Philips Pasta Maker stops during processing and displays 'E2' with flashing indicators and an alarm, the mixing paddle may be blocked. Disconnect the appliance from the power, clean the pasta maker, and consult the user manual to restart the pasta-making process.
Why is the weight fluctuating on my Philips HR2381?
If the weight shown on the screen of your Philips Pasta Maker changes constantly when weighing flour, it may be because you are touching the appliance or the power cord. Avoid touching these during the weighing process.
Why I am unable to make pasta successfully with the liquid calculation function on my Philips HR2381?
If you're unable to make pasta successfully using the liquid calculation function on your Philips Pasta Maker, it might be because the recipe (like cookies or gluten-free pasta) requires skipping this step. Press the Start/pause button for 5 seconds to start mixing and extruding directly.
Why is my Philips Pasta Maker leaking a small amount of water?
If a small amount of water leaks from your Philips Pasta Maker, it's likely because water was added before the program started. Add water right after the program starts, following the user manual.
Why does the weight fluctuate on my Philips Pasta Maker when weighing flour?
If the weight display on your Philips Pasta Maker fluctuates while weighing flour, avoid touching the appliance or the power cord during the weighing process.
What to do if Philips Pasta Maker fails with liquid calculation?
If the liquid calculation function on your Philips Pasta Maker isn't working for certain recipes like cookies or gluten-free pasta, skip the liquid calculation. Press the Start/pause button for 5 seconds to start mixing and extruding directly.
What does EEE mean on my Philips HR2381?
If 'EEE' is displayed on the screen of your Philips Pasta Maker, it indicates the appliance is malfunctioning. Contact the service center.
Why does my Philips HR2381 stop when I open the lid?
If your Philips Pasta Maker stops working when you open the lid during processing, this is a safety feature. To continue, close the lid properly and press the Start/pause button to resume the previous operation.
Why does my Philips Pasta Maker suddenly stop and restart?
The safety switch in your Philips Pasta Maker may have been triggered because the front panel knob is loose or there are too many ingredients. Ensure the front panel is securely assembled. The maximum amount of flour for each batch is 600g; reduce the amount if you've added more.
Why does my Philips HR2381 Pasta Maker stop during processing without any alarms?
If your Philips Pasta Maker stops during processing without any alarm or flashing lights, it may have overheated from extended use. Disconnect it from the power source and let it cool down. To protect the appliance, limit continuous use to under 45 minutes, and allow a 15-minute rest before restarting.
General| Power | 150 W |
|---|---|
| Capacity | 500 g |
| Material | Plastic, Stainless Steel |
| Dimensions | 38.5 x 22 x 30 cm |
| Voltage | 220-240 V |
| Functions | Kneading, Extruding |
| Frequency | 50 Hz |
| Pasta shapes | Spaghetti, Fettuccine |
To Next Page
