What does E2 error mean on my Philips HR2381/05?
If your Philips Pasta Maker stops during processing and displays 'E2' with flashing indicators and an alarm, the mixing paddle may be blocked. Disconnect the appliance from the power, clean the pasta maker, and consult the user manual to restart the pasta-making process.
Why is the weight fluctuating on my Philips HR2381/05 Pasta Maker?
If the weight shown on the screen of your Philips Pasta Maker changes constantly when weighing flour, it may be because you are touching the appliance or the power cord. Avoid touching these during the weighing process.
Why I am unable to make pasta successfully with the liquid calculation function on my Philips HR2381/05 Pasta Maker?
If you're unable to make pasta successfully using the liquid calculation function on your Philips Pasta Maker, it might be because the recipe (like cookies or gluten-free pasta) requires skipping this step. Press the Start/pause button for 5 seconds to start mixing and extruding directly.
Why is my Philips HR2381/05 Pasta Maker leaking a small amount of water?
If a small amount of water leaks from your Philips Pasta Maker, it's likely because water was added before the program started. Add water right after the program starts, following the user manual.
Why does the weight fluctuate on my Philips HR2381/05 when weighing flour?
If the weight display on your Philips Pasta Maker fluctuates while weighing flour, avoid touching the appliance or the power cord during the weighing process.
What to do if Philips HR2381/05 Pasta Maker fails with liquid calculation?
If the liquid calculation function on your Philips Pasta Maker isn't working for certain recipes like cookies or gluten-free pasta, skip the liquid calculation. Press the Start/pause button for 5 seconds to start mixing and extruding directly.
What does EEE mean on my Philips Pasta Maker?
If 'EEE' is displayed on the screen of your Philips Pasta Maker, it indicates the appliance is malfunctioning. Contact the service center.
What to do if my Philips HR2381/05 stops with error E2?
If the Philips Pasta Maker stops during processing, E2 appears, the indicators flash, and an alarm sounds, it could be due to several reasons: * A foreign object might be blocking the mixing paddle, so disconnect the appliance, clean it, and restart following the manual. * The dough may be too dry. * The wrong program might have been selected.
Why does my Philips Pasta Maker suddenly stop and restart?
The safety switch in your Philips Pasta Maker may have been triggered because the front panel knob is loose or there are too many ingredients. Ensure the front panel is securely assembled. The maximum amount of flour for each batch is 600g; reduce the amount if you've added more.
Why does my Philips Pasta Maker stop during processing without any alarms?
If your Philips Pasta Maker stops during processing without any alarm or flashing lights, it may have overheated from extended use. Disconnect it from the power source and let it cool down. To protect the appliance, limit continuous use to under 45 minutes, and allow a 15-minute rest before restarting.
General| Power | 200 W |
|---|---|
| Material | Plastic |
| Color | White |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Included Accessories | Measuring cup |
To Next Page
