To Next PageTo Next PageWhy is the weight fluctuating on my Philips Pasta Maker?
If the weight shown on the screen of your Philips Pasta Maker changes constantly when weighing flour, it may be because you are touching the appliance or the power cord. Avoid touching these during the weighing process.
Why I am unable to make pasta successfully with the liquid calculation function on my Philips Pasta Maker?
If you're unable to make pasta successfully using the liquid calculation function on your Philips Pasta Maker, it might be because the recipe (like cookies or gluten-free pasta) requires skipping this step. Press the Start/pause button for 5 seconds to start mixing and extruding directly.
Why is my Philips HR2380 leaking a small amount of water?
If a small amount of water leaks from your Philips Pasta Maker, it's likely because water was added before the program started. Add water right after the program starts, following the user manual.
Why does my Philips HR2380 Pasta Maker keep stopping and starting?
If the safety switch in your Philips Pasta Maker is triggered, causing it to stop or restart during processing, it could be due to: * A loose front panel knob. Ensure the front panel is securely assembled. * Too many ingredients. The maximum flour amount is 600 g/21 oz per batch. Reduce the flour if you've added more.
Why does my Philips HR2380 stop when I open the lid?
If your Philips Pasta Maker stops working when you open the lid during processing, this is a safety feature. To continue, close the lid properly and press the Start/pause button to resume the previous operation.
What does EEE mean on my Philips HR2380 Pasta Maker?
If 'EEE' is displayed on the screen of your Philips Pasta Maker, it indicates the appliance is malfunctioning. Contact the service center.
What to do if my Philips HR2380 Pasta Maker stops with error E2?
If the Philips Pasta Maker stops during processing, E2 appears, the indicators flash, and an alarm sounds, it could be due to several reasons: * A foreign object might be blocking the mixing paddle, so disconnect the appliance, clean it, and restart following the manual. * The dough may be too dry. * The wrong program might have been selected.
Why does my Philips HR2380 suddenly stop and restart?
The safety switch in your Philips Pasta Maker may have been triggered because the front panel knob is loose or there are too many ingredients. Ensure the front panel is securely assembled. The maximum amount of flour for each batch is 600g; reduce the amount if you've added more.
Why does my Philips HR2380 stop during processing without any alarms?
If your Philips Pasta Maker stops during processing without any alarm or flashing lights, it may have overheated from extended use. Disconnect it from the power source and let it cool down. To protect the appliance, limit continuous use to under 45 minutes, and allow a 15-minute rest before restarting.
What to do if my Philips Pasta Maker stops when I open the lid?
To resume the previous operation on your Philips Pasta Maker, close the lid properly and press the Start/Pause button.
General| Brand | Philips |
|---|---|
| Model | HR2380 |
| Category | Pasta Maker |
| Language | English |
