To Next PageTo Next PageWhat to do if Philips HR2381 Pasta Maker stops during processing, E2 displays, indicators flash, and alarm sounds?
If your Philips pasta maker stops, the screen displays 'E2', the indicators flash quickly, and an alarm sounds, it means the mixing paddle might be blocked. Disconnect the appliance from the power, clean the pasta maker, and restart the pasta-making process following the user manual.
How to fix a Philips Pasta Maker that sounds but doesn't work?
If your Philips Pasta Maker sounds but doesn't work, it might be due to incorrect assembly of parts. Ensure that the mixing chamber, shaping disc, and front panel are assembled correctly, following the user manual.
How to fix Philips Pasta Maker if it sounds but doesn't work?
If your Philips Pasta Maker makes a sound but doesn't operate after pressing the On/Off button, it might be due to incorrect assembly of the mixing chamber, shaping disc, or front panel. Ensure all parts are assembled correctly by following the user manual.
What to do if my Philips HR2381 stops when I open the lid?
To resume the previous operation on your Philips Pasta Maker, close the lid properly and press the Start/Pause button.
Why does my Philips HR2381 Pasta Maker stop during processing without any alarms?
If your Philips Pasta Maker stops during processing without any alarm or flashing lights, it may have overheated from extended use. Disconnect it from the power source and let it cool down. To protect the appliance, limit continuous use to under 45 minutes, and allow a 15-minute rest before restarting.
How to fix Philips Pasta Maker when it sounds but doesn't work?
If your Philips Pasta Maker makes a sound but doesn't start after pressing the On/Off button, the mixing chamber, shaping disc, or front panel may be assembled incorrectly. Refer to the user manual to ensure all parts are assembled correctly.
What to do if my Philips HR2381 Pasta Maker stops suddenly during processing?
If your Philips Pasta Maker stops or restarts during processing, it could be due to a loose front panel knob. Ensure the front panel is securely assembled. Another reason could be excessive ingredients. The maximum amount of flour for each batch is 600g. If you've added more, reduce the amount in your next batch.
What to do if Philips HR2381 Pasta Maker stops without warning?
If your Philips Pasta Maker stops during processing with no alarm or flashing lights, it may have overheated from continuous use. Disconnect it from the power source and let it cool down for 15 minutes before restarting. To protect the appliance, limit continuous use to under 45 minutes.
How to fix a Philips Pasta Maker that makes noise but doesn't start?
If your Philips Pasta Maker sounds but doesn't work after pressing the On/Off button, it might be because the mixing chamber, shaping disc, or front panel isn't assembled correctly. Refer to the user manual to ensure all parts are properly assembled.
Why does my Philips HR2381 Pasta Maker keep stopping and starting?
If the safety switch in your Philips Pasta Maker is triggered, causing it to stop or restart during processing, it could be due to: * A loose front panel knob. Ensure the front panel is securely assembled. * Too many ingredients. The maximum flour amount is 600 g/21 oz per batch. Reduce the flour if you've added more.
General| Power | 150 W |
|---|---|
| Capacity | 500 g |
| Material | Plastic, Stainless Steel |
| Dimensions | 38.5 x 22 x 30 cm |
| Voltage | 220-240 V |
| Functions | Kneading, Extruding |
| Frequency | 50 Hz |
| Pasta shapes | Spaghetti, Fettuccine |
