ENGLISH 19
3
Loosen the front panel control knobs.
Note:
• The front panel is heavy. Take extra caution when
removing it.
4
Disassemble the front panel, the shaping disc, the shaping disc holder, the mixing
paddle, and the mixing chamber in order.
5
Use a dry cloth to clean our residue in the hole
❶ where the mixing paddle is placed.
6
Clean the shaping disc with the supplied cleaning
tool to remove the dough residues. After that,
you can clean it with water.
Tip:
• For the spaghetti and fettuccine shaping discs, put the
shaping disc into the freezer for 2 hours. Then use the corresponding cleaning tool
to poke out the dough in the holes.
1
To Next Page
Loading...
