To Next PageTo Next PageWhat to do if my Philips HR2665/93 stops working when I open the lid?
For safety, the Philips Pasta Maker always stops when the lid is opened during processing. To resume, close the lid properly and press the Start/pause button.
How to fix Philips Pasta Maker E1 error?
If E1 appears on the screen of your Philips Pasta Maker, it means the shaping disc is not attached, or the lid is not in place. Attach the disc holder to the main unit, properly attach the shaping disc, fix the front panel, and ensure the lid is correctly attached.
How to resolve Philips HR2665/93 E3 error during calibration?
If E3 appears on the screen of your Philips Pasta Maker during calibration, remove the mixing chamber lid from the appliance to start calibration. Then, switch off and unplug your Pasta Maker, plug it back in, and restart the device.
Why does my Philips HR2665/93 sound but not work?
If your Philips Pasta Maker sounds but doesn't work after pressing the On/Off button, the mixing chamber, shaping disc, or front panel might be assembled incorrectly. Ensure all parts are assembled correctly by following the user manual.
What to do if Philips HR2665/93 Pasta Maker shows E4?
If E4 is displayed on the screen, switch off and unplug your Philips Pasta Maker. Plug it back in and restart the device.
What to do if Philips Pasta Maker safety switch is triggered?
If the safety switch of your Philips Pasta Maker is triggered, causing it to stop or restart, it might be because the front panel knob is loose or there are excessive ingredients. Make sure the front panel is securely assembled. Also, ensure you're not using more than 600g of flour per batch; reduce the amount if necessary.
Why does the weight change on my Philips Pasta Maker when weighing flour?
If the weight shown on the screen of your Philips Pasta Maker changes constantly while weighing flour, it is because you are touching the appliance or the power cord. Do not touch the appliance or the power cord when the appliance is weighing the flour.
Why is water leaking from my Philips HR2665/93?
If a small amount of water is leaking from your Philips Pasta Maker, it's likely because water was added before the program started. Add water right after the program starts, following the user manual instructions.
What to do if unable to make pasta successfully with the liquid calculation function in Philips HR2665/93?
If you're unable to make pasta successfully using the liquid calculation function on your Philips Pasta Maker because the indicated liquid amount doesn't apply to some recipes, press the Start/pause button for 5 seconds to start mixing and extruding directly.
General| Capacity | 500 g |
|---|---|
| Weight | 3.5 kg |
| Type | Pasta Maker |
| Programs | 8 |
| Dishwasher safe parts | Yes |
| Number of speed settings | 1 |
| Material | Plastic |
| Included accessories | Measuring cup |
Describes the standard process for making pasta using program selection.
Explains how to use the extrusion-only mode for leftover dough.
Details how to bypass weighing and start mixing directly.
