How to fix E1 error on Philips HR2660 Pasta Maker?
If 'E1' appears on the screen of your Philips Pasta Maker, it indicates that the shaping disc is not attached, or the lid is not correctly in place. Attach the disc holder to the main unit, properly attach the shaping disc, and fix the front panel securely. Ensure the lid is also properly attached.
Why does my Philips Pasta Maker sound but not work?
If your Philips Pasta Maker makes a sound when you press the On/Off button but doesn't start, the mixing chamber, shaping disc, or front panel may not be assembled correctly. Ensure all parts are assembled correctly following the user manual.
Why does my Philips Pasta Maker stop when I open the lid?
The Philips Pasta Maker is designed to stop working when the lid is opened during processing for safety reasons. To resume, close the lid properly and press the Start/Pause button.
What to do if Philips HR2660 Pasta Maker stops when lid is opened?
If your Philips Pasta Maker stops working when you open the lid during processing, close the lid properly and press the Start/pause button to resume the previous operation.
Why does my Philips Pasta Maker stop without alarm?
If your Philips Pasta Maker stops during processing without any alarm sounds or flashes, it may have overheated from continuous use. Disconnect it from the power source and allow it to cool down for at least 15 minutes before restarting. To protect the appliance, avoid continuous use for more than 45 minutes.
Why does the Philips HR2660 Pasta Maker stop when I open the lid?
For safety, the appliance is designed to stop when the lid is opened during processing. To resume, close the lid and press the Start/Pause button.
Why is my Philips HR2660 Pasta Maker leaking water?
If you notice a small amount of water leaking from your Philips Pasta Maker, it's likely because water was added before the program started. Ensure you follow the user manual instructions and add water right after the program starts.
What does E4 error mean on Philips Pasta Maker?
The E4 error indicates a malfunction. Turn off and unplug your pasta maker, then plug it back in and restart it. If the issue persists, no other solution is available.
What to do if E2 displays on my Philips HR2660 Pasta Maker?
If the Philips Pasta Maker stops during processing, E2 appears on the screen, the indicators flash quickly, and the alarm sounds, it could be due to a few reasons. The mixing paddle might be blocked by foreign objects, so disconnect the appliance, clean it, and restart following the user manual. Also, the dough may be too dry, or the wrong program may have been selected.
What to do if Philips HR2660 Pasta Maker sounds but doesn't work?
This can happen if the mixing chamber, shaping disc, or front panel isn't assembled correctly. Double-check the user manual to ensure all parts are properly assembled.
Identifies extreme hazards that could lead to severe injury or death.
Highlights potential hazards that could result in injury or appliance damage.
Addresses minor risks or precautions to prevent appliance damage or ensure correct operation.
Guide on preparing ingredients and initiating the automatic pasta making program.
Key advice and notes for successful pasta making and optimal appliance use.
General| Type | Electric pasta machine |
|---|---|
| Capacity | 700 g |
| Material | Metal, Plastic |
| Cable length | 0.8 m |
| Display type | LED |
| Product color | White |
| Built-in display | Yes |
| Country of origin | China |
| Quantity per pack | 1 pc(s) |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
Weight and Dimensions| Depth | 327 mm |
|---|---|
| Width | 229 mm |
| Height | 322 mm |
| Weight | 6810 g |
| Package depth | 410 mm |
| Package width | 370 mm |
| Package height | 335 mm |
| Package weight | 9380 g |
To Next Page
