Philips HR2665/96 - User Manual

Questions and Answers

J
James MorrisAug 15, 2025
What to do if my Philips HR2665/96 Pasta Maker stops working when I open the lid?
- A
  Adam OwensAug 15, 2025
  For safety, the Philips Pasta Maker always stops when the lid is opened during processing. To resume, close the lid properly and press the Start/pause button.
T
timothypowersAug 18, 2025
How to fix Philips HR2665/96 Pasta Maker E1 error?
- K
  Kent BullockAug 18, 2025
  If E1 appears on the screen of your Philips Pasta Maker, it means the shaping disc is not attached, or the lid is not in place. Attach the disc holder to the main unit, properly attach the shaping disc, fix the front panel, and ensure the lid is correctly attached.
R
Richard McbrideAug 21, 2025
How to resolve Philips HR2665/96 E3 error during calibration?
- M
  Marcus WilliamsAug 22, 2025
  If E3 appears on the screen of your Philips Pasta Maker during calibration, remove the mixing chamber lid from the appliance to start calibration. Then, switch off and unplug your Pasta Maker, plug it back in, and restart the device.
S
Sabrina RussellAug 25, 2025
Why does my Philips Pasta Maker sound but not work?
- M
  monroelisaAug 26, 2025
  If your Philips Pasta Maker sounds but doesn't work after pressing the On/Off button, the mixing chamber, shaping disc, or front panel might be assembled incorrectly. Ensure all parts are assembled correctly by following the user manual.
D
davidrogersAug 28, 2025
What to do if Philips HR2665/96 shows E4?
- J
  James MurphyAug 28, 2025
  If E4 is displayed on the screen, switch off and unplug your Philips Pasta Maker. Plug it back in and restart the device.
E
Emma PowellAug 31, 2025
What to do if Philips HR2665/96 Pasta Maker safety switch is triggered?
- K
  Kimberly MedinaAug 31, 2025
  If the safety switch of your Philips Pasta Maker is triggered, causing it to stop or restart, it might be because the front panel knob is loose or there are excessive ingredients. Make sure the front panel is securely assembled. Also, ensure you're not using more than 600g of flour per batch; reduce the amount if necessary.
A
Alyssa KimSep 4, 2025
Why does the weight change on my Philips HR2665/96 Pasta Maker when weighing flour?
- T
  Tami KentSep 4, 2025
  If the weight shown on the screen of your Philips Pasta Maker changes constantly while weighing flour, it is because you are touching the appliance or the power cord. Do not touch the appliance or the power cord when the appliance is weighing the flour.
S
Stephanie YatesSep 7, 2025
Why is water leaking from my Philips HR2665/96?
- J
  janethaasSep 7, 2025
  If a small amount of water is leaking from your Philips Pasta Maker, it's likely because water was added before the program started. Add water right after the program starts, following the user manual instructions.
M
Marcus BentonSep 12, 2025
What to do if unable to make pasta successfully with the liquid calculation function in Philips HR2665/96 Pasta Maker?
- C
  Carrie LopezSep 12, 2025
  If you're unable to make pasta successfully using the liquid calculation function on your Philips Pasta Maker because the indicated liquid amount doesn't apply to some recipes, press the Start/pause button for 5 seconds to start mixing and extruding directly.