Philips HTL3110B - 7 Product Specifications

14 EN
7 Product
specifications
Note
• Specications and design are subject to change without
notice.
Amplier
• FTC total output power: 40W
• Left + Right:
25W (1%THD, 8ohm, 120Hz-20kHz)
• Subwoofer:
15W (1%THD, 4ohm, 30Hz-80Hz)
• RMS Total output power:
120W RMS (+/- 0.5 dB, 10% THD)
• Frequency response: 20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio: > 65 dB (CCIR) /
(A-weighted)
• Input sensitivity:
• AUX: 900 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16, FAT32, NTFS
• Supports MP3 and WMA le formats
• Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz,
22 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz
• WMA: 44.1 kHz, 48 kHz
• Constant bit rate:
• MP3: 8 kbps-320 kbps
• WMA: 32 kbps-192 kbps
• Version:
• WMA: V7, V8, V9
Bluetooth
• Bluetooth proles: A2DP, AVRCP
• Bluetooth version: 3.0 + EDR
Main unit
• Power supply:
• Model (Philips branded AC power
adapter): DYS602-210309W; AS650-
210-AA309
• Input: 100-240 V~, 50/60 Hz 1.5 A
• Output: 21V , 3.09A
• Standby power consumption: ≤ 0.5 W
• Speaker impedance
• Woofer: 8 ohm
• tweeter: 16 ohm
• Speaker drivers: 2 x (90mm/3.5" x
34mm/1.3") woofer + 2 x 31mm/1.2"
tweeter
• Dimensions (WxHxD): 843 x 52 x 60 mm
• Weight: 1.4 kg
Subwoofer
• Power supply: 110-240 V~, 50-60 Hz
• Power consumption: 20 W
• Standby power consumption: ≤ 0.5 W
• Impedance: 4 ohm
• Speaker drivers: 1 x 134 mm (5.25") woofer
• Dimensions (WxHxD):
226 x 251 x 306 mm
• Weight: 3.9 kg
Remote control batteries
• 1 x AAA-R03-1.5 V