Philips HTL9100 - Remote Control Functions

5
English
EN
Remote control
This section includes an overview of the
remote control.
a (Standby-On)
• Switch the SoundBar on or to standby.
• When EasyLink is enabled, press
and hold for at least three seconds
to switch all connected HDMI CEC
compliant devices to standby.
b HDMI selection
HDMI ARC: Switch your source to HDMI
ARC connection.
HDMI 1: Switch your source to the HDMI
IN 1 connection.
HDMI 2: Switch your source to the HDMI
IN 2 connection.
Bluetooth
a
j
i
h
g
f
d
c
e
b
c Source buttons
OPTICAL: Switch your audio source to
the optical connection.
COAX: Switch your audio source to the
coaxial connection.
AUDIO-IN: Switch your audio source to
the AUDIO-In connection (3.5mm jack).
AUX: Switch your audio source to the
AUX connection.
Bluetooth: Switch to Bluetooth mode.
d NIGHT MODE ON/OFF
Turn night mode on or off.
e Volume control
+/-: Increase or decrease volume.
: Mute or restore volume.
f V.SURR
• Toggle between stereo and virtual
surround sound.
• In HDMI-in mode (connected via
HDMI IN 1 or HDMI IN 1), press and
hold to switch audio output through
the SoundBar speaker or TV speaker.
g BASS +/-
Increase or decrease bass.
h TREBLE +/-
Increase or decrease treble.
i AUDIO SYNC +/-
Increase or decrease audio delay.
j AUTO VOLUME ON/OFF
Turn auto volume on or off.
Connectors
This section includes an overview of the
connectors available on your SoundBar.