17
English
Step 1: Turning on the DVD
system
A Press STANDBY ON (2).
B
Press the SOURCE button on the front
panel repeatedly to select :
DISC ¤ FM ¤ MW ¤ TV ¤ AUX
¤ DISC ....
Or
Press DISC, TUNER, TV or AUX/DI
on the remote control.
Turning off to Eco Power standby
mode
Press STANDBY ON (2).
The display screen will turn off.
Getting Started
Step 2: Finding the correct
viewing channel
Before you start ...
Make sure you have completed all the
necessary connections before proceeding.
A Press SOURCE button until “DISC”
appears on the display panel.
B Turn on the TV and set it to the correct
video-in channel. You should see the
blue DVD background screen on the TV.
You may go to Channel 1 on your TV,
then press the Channel Down button on
your TV’s remote control until you see
the Video In channel.
You may press ° button repeatedly
on your TV’s remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO. See your
TV manual for more details.
Downloaded From TheatreSystem-Manual.com Manuals
To Next Page
Loading...
