Philips HTS3100 - Using Automatic Preset; Using Manual Preset; Selecting a Preset Radio Station; Deleting a Preset Radio Station

37
English
Tuner Operations (continued)
B
Press PLAY X until “START ...” appears
on the display panel.
 The system will start searching from
the FM band followed by the MW band.
 All the available radio stations with
strong signal will be stored automatically.
 Once complete, the last tuned radio
station will be played back.
Using automatic preset
Use automatic presetting to store or
reinstall all the preset radio stations.
A Press TUNER to select “FM” or “MW’
band.
B Hold down PROGRAM until
“START ...” appears on the display panel.
 All previously stored radio stations
will be replaced.
Using manual preset
Use manual presetting to store your
favourite radio stations.
A Tune to your desired radio station (see
“Tuning to radio stations”).
B Press PROGRAM.
C Use ./ > keys to select a preset
number that you want to store the
current radio station.
D Press PROGRAM to store.
Selecting a preset radio
station
A Press TUNER to select “FM” or “MW’
band.
B Use ./ > keys to select a preset
number (or use the numeric keypad on
the remote control).
 The waveband, preset number
followed by the radio frequency will
appear on the display panel.
Deleting a preset radio
station
A In tuner mode, use ./ > keys to
select a preset radio station.
B Hold down Ç until “FM/MW X
DELETED” appears.
 “X” is the preset number.
 The radio station continues to play
but has been deleted from the preset list.
 The rest of the preset radio stations
remain unchanged.
display panel
Downloaded From TheatreSystem-Manual.com Manuals