Philips HTS3100 - Specifi Cations

44
English
Speci cations
AMPLIFIER
Output power: 200 W
- Front : 25 W / channel
- Rear: 25 W / channel
- Centre : 50 W
- Subwoofer: 50 W
Frequency Response: 20 Hz – 20 kHz / –3 dB
Signal-to-Noise Ratio: > 65 dB (CCIR)
Input Sensitivity
- AUX In : 1000 mV
TUNER
Tuning Range: FM 87.5–108 MHz (50kHz)
MW 531–1602 kHz (9kHz)
26 dB Quieting
Sensitivity: FM 20 dB, MW 4μV/m
Image Rejection Radio:FM 25 dB, MW 28 dB
IF Rejection Ratio: FM 60 dB, MW 45 dB
Signal-to-Noise Ratio: FM 60 dB, MW 40 dB
AM Suppression Ratio: FM 30 dB
Harmonic Distortion: FM Mono 3%
FM Stereo 3%
MW 5%
Frequency Response: FM 180 Hz–10 kHz / ±6 dB
Stereo Separation: FM 26 dB (1 kHz)
Stereo Threshold: FM 23.5 dB
DISC SECTION
Laser Type: Semiconductor
Disc Diametre: 12cm / 8cm
Video Decoding: MPEG-1 / MPEG-2 /
/ DivX 3/4/5/6, Ultra
Video DAC: 12 Bits
Signal System: PAL / NTSC
Video Format: 4:3 / 16:9
Video S/N: 65 dB
Composite Video
Output: 1.0 Vp-p, 75Ω
Audio DAC: 24 Bits / 192 kHz
Frequency Response: 4 Hz–20 kHz (44.1 kHz)
4 Hz–22 kHz (48 kHz)
4 Hz–44 kHz (96 kHz)
MAIN UNIT
Power Supply Rating: 220–240 V; 50 Hz
Power Consumption: 70 W
Eco Standby power: < 1 W
Dimensions: 360 x 54 x 324 (mm)
(w x h x d)
Weight: 2.66 kg
SPEAKERS
FRONT and REAR speakers
System: 1-way, closed box system
Impedance: 4 Ω
Speaker drivers: 1 x 76 mm (3”) woofer
Frequency response: 120 Hz – 20 kHz
Dimensions: 97.5 x 191.3 x 71.4 (mm)
(w x h x d)
Weight: 0.56 kg/each
CENTRE speaker
System: 1-way, closed box system
Impedance: 8 Ω
Speaker drivers: 1 x 76 mm (3”) woofer
Frequency response: 120 Hz – 20 kHz
Dimensions: 239.3 x 99.6 x 69.4 (mm)
(w x h x d)
Weight: 0.72 kg
SUBWOOFER
Impedance: 8 Ω
Speaker drivers: 165 mm (6.5”) woofer
Frequency response: 30 Hz – 120 Hz
Dimensions: 194 x 266 x 339.5 (mm)
(w x h x d)
Weight: 3.5 kg
Speci cations subject to change without prior
notice.
Downloaded From TheatreSystem-Manual.com Manuals