Philips HTS3261 - BD-Live Features; BD-Live Requirements; Accessing BD-Live

22
Access BD-Live with an SD card
1 Connect your home theater to the home
network and internet. (see ‘Computers and
the Internet’ on page 17)
2 Insert the SD memory card into the SD
CARD slot on your home theater.
» The rst time you insert an SD memory
card, the card is formatted. After
formatting, leave the card in the home
theater (see ‘Format an SD card’ on page
32).
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Advanced] > [Local Storage] > [SD
card], and then press OK.
6 Select the BD-Live icon in the disc menu,
and then press OK.
» BD-Live starts to load. The loading time
depends on the disc and your internet
connection.
7 Press the Navigation buttons to navigate
BD-Live, and then press OK to select an
item.
Clear memory
If your storage device does not have enough
memory for the BD-Live content, clear the
memory on the storage device.
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Advanced] > [Clear memory], and
then press OK.
» This clears the local memory and deletes
the BD-Live les that you downloaded
on your storage device.
BD-Live on Blu-ray
On Blu-ray discs with BD-Live content, access
additional features, such as internet chats with
the director, the latest movie trailers, games,
wallpaper, and ringtones.
What you need
• a Blu-ray disc with BD-Live content
• an internet connection
• a storage device:
• a USB storage device, with at least 1
GB of memory, or
• an SD memory card of type SDHC
Class 6, with at least 8 GB of memory.
Note
•
BD-Live services vary from country to country,
and depend on the disc.
• When you use BD-Live, data on the disc and
home theater are accessed by the content
provider.
Access BD-Live with a USB storage
device
1 Connect your home theater to the home
network and internet (see ‘Computers and
the Internet’ on page 17).
2 Connect the USB storage device to the
home theater.
• The USB storage device is used
to store the downloaded BD-Live
content.
3 Press (Home).
4 Select [Setup], and then press OK.
5 Select [Advanced] > [Local Storage] >
[USB], and then press OK.
6 Select the BD-Live icon in the disc menu,
and then press OK.
» BD-Live starts to load. The loading time
depends on the disc and your internet
connection.
7 Press the Navigation buttons to navigate
BD-Live, and then press OK to select an
item.
EN