Philips HTS3261 - Update Software via USB; Software Update Prerequisites; Download and Update Software

38
Step 2: Update the software
Caution
•
Before you connect the USB ash drive to
your home theater, make sure that there is
no disc in the disc compartment, and the disc
compartment is closed.
1 Connect the USB ash drive to your home
theater.
2 Switch your TV to the correct source for
your home theater.
3 Press (Home), and then select [Setup].
4 Select [Advanced] > [Software Update] >
[USB].
5 Follow the instructions on the TV to
conrm the update.
» When the software update is complete,
the home theater automatically switches
off and restarts. If it does not, disconnect
the power cord for a few seconds, and
then reconnect it.
Note
•
When the software update is in progress, do
not turn off the power or remove the USB
ash drive.
Update software through USB
What you need
• A USB ash drive, with at least 75MB of
memory. The USB ash drive must be FAT
or NTFS formatted. Do not use a USB hard
drive.
• A computer with Internet access.
• An archive utility that supports the ZIP
le format (for example, WinZip® for
Microsoft® Windows® or Stuft® for
Macintosh®).
Step 1: Download the latest software
1 Connect a USB ash drive to your
computer.
2 In your web browser, go to www.philips.
com/support.
3 At the Philips Support website, nd your
product and locate the Software and
drivers.
» The software update is available as a zip
le.
4 Save the zip le in the root directory of
your USB ash drive.
5 Use the archive utility to extract the
software update le in the root directory of
the USB ash drive.
» The les are extracted under the UPG_
ALL folder of your USB ash drive.
6 Disconnect the USB ash drive from your
computer.
EN