Philips HTS3510 User Manual

13
English
2 Connect a USB storage device to the home
theater.
3 When audio is played, press CREATE MP3.
4 Select [Yes] and press OK to conrm.
5 Select the settings in the [OPTIONS] panel,
then press OK.
• [Speed] : Selects the write-to-le
speed.
• [Bitrate] : Selects the conversion
quality.
• [CRT ID3] : Copies information on the
tracks in the MP3 les.
• [Device] : Selects the USB device
which you use to store the MP3 les.
6 Press to access the [TRACK] panel.
7 Select an audio track, then press OK.
• [Select All] : Selects all tracks.
• [Deselect all] : De-selects all tracks.
8 Select [Start] in the menu to convert, then
press OK.
» A new folder is created in the USB
storage device to store all the new MP3
audio les.
• To exit the menu, select [Exit] and
press OK.
Note
•
During the conversion process, do not press
any buttons.
• DTS CDs and copy-protected CDs cannot be
converted.
• Write-protected or password-protected USB
storage device cannot be used to store MP3
les.
CREATE MP3
OPTIONS
TRACK
Bitrate 128kbps
SUMMARY
Select Track 0
Start Exit
Select All
Deselect All
Time 00:00
Track01 04:14
Track02 04:17
Track03 03:58
Track04 04:51
Track05 03:53
Track06 04:09
Track07 04:38
Speed Normal
CRT ID3 Ye s
Device USB1
Button Action
/
Selects a preset radio station.
/
Searches for a radio station.
Fine tunes a radio frequency.
Press and hold to erase the
preset radio station.
Press to stop the installation of
radio stations.
PROGRAM Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
ve seconds to reinstall radio
stations.
Note
•
AM and digital radio are not supported.
• If no stereo signal is detected, you are
prompted to install the radio stations again.
• For the best reception, place the antenna away
from the TV or other sources of radiation.
Change tuning grid
In some countries, you can switch the FM tuning
grid between 50 kHz and 100 kHz. Changing
tuning grid erases all preset radio stations.
1 Press RADIO.
2 Press .
3 Press and hold until ‘GRID 9’ (50 kHz)
or ‘GRID 10’ (100 kHz) is displayed.
Play audio from TV or other
devices
Press AUDIO SOURCE repeatedly to select
the audio output of the connected device (see
‘Connect audio from TV or other devices’ on
page 9).
CreateMP3audioles
Use the home theater to convert audio CDs into
MP3 audio les.
1 Insert an audio CD (CDDA/HDCD) into
the home theater.
EN

Philips HTS3510 Specifications

General

Brand	Philips
Model	HTS3510
Category	Home Theater System
Language	English