Philips HTS3565/78 - Specifications

55
English
Speci cations
AMPLIFIER
Total output power : 4x125+2x250 RMS
Frequency Response: 180 Hz – 18 kHz / ±3 dB
Signal-to-Noise Ratio: > 60 dB (A-weighted)
Input Sensitivity
- AUX 1: 400 mV
- AUX 2: 400 mV
- MP3 LINK: 400 mV
RADIO
Tuning Range: FM 87.5-108 MHz
(50/100 kHz)
26 dB Quieting
Sensitivity: FM 22 dBf
IF Rejection Ratio: FM 60 dB
Signal-to-Noise Ratio: FM 50 dB
Harmonic Distortion: FM Mono 3%
FM Stereo 3%
Frequency Response FM 180 Hz–10 kHz / ±6 dB
Stereo Separation FM 26 dB (1 kHz)
Stereo Threshold FM 29 dB
DISC
Laser Type Semiconductor
Disc Diametre 12cm / 8cm
Video Decoding MPEG-1 / MPEG-2 /
/ DivX 3/4/5/6, Ultra
Video DAC 12 Bits
Signal System PAL / NTSC
Video Format 4:3 / 16:9
Video S/N 56 dB
Composite Video
Output 1.0 Vp-p, 75Ω
Frequency Response 4 Hz–20 kHz (44.1 kHz)
4 Hz–22 kHz (48 kHz)
4 Hz–44 kHz (96 kHz)
PCM IEC 60958
Dolby Digital IEC 60958, IEC 61937
DTS IEC 60958, IEC 61937
USB
Compatibility Hi-Speed USB (2.0)
Class Support UMS (USB Mass
Storage Class),
MTP (Media Transfer
Protocol)
MAIN UNIT
Power Supply Rating: 110-127 V / 220-240 V;
50-60 Hz
Power Consumption: 180 W
Dimensions: 435 x 58 x 360 (mm)
(w x h x d)
Weight: 3.75 kg
FRONT AND REAR SPEAKERS
System: Full range satellite
Impedance: 6 Ω
Speaker drivers: 3” full range speaker
Frequency response: 150 Hz – 20 kHz
Dimensions: 103 x 203 x 71 (mm)
(w x h x d)
Weight: 0.54 kg/each
CENTRE SPEAKER
System: Full range satellite
Impedance: 3 Ω
Speaker drivers: 2 x 2.5” full range speaker+
1 x 2” tweeter
Frequency response: 150 Hz – 20 kHz
Dimensions: 440 x 105 x 75 (mm)
(w x h x d)
Weight: 1.39 kg
SUBWOOFER
Impedance: 3 Ω
Speaker drivers: 165mm (6.5”) woofer
Frequency response: 40 Hz – 150 Hz
Dimensions: 163 x 363 x 369 (mm)
(w x h x d)
Weight: 5.08 kg
Speci cations subject to change without prior
notice.
1_hts3565_78_eng1.indd 551_hts3565_78_eng1.indd 55 10/14/2008 4:56:55 PM10/14/2008 4:56:55 PM