EasyManua.ls Logo

Philips HTS3569 - Page 40

Philips HTS3569
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40 EN
[ Picture Setting ]
Select a prede ned set of picture colour
settings or customise your personal setting.
[ Standard ] – original colour setting.
[ Bright ] – vibrant colour setting.
[ Soft ] – warm colour setting.
[ Personal ] – customise the colour
setting. Set the level of brightness,
contrast, tint and colour saturation in
the menu, then press OK.
[ HDMI Setup ]
When you connect this unit and TV with
HDMI cable, select the best HDMI setup
that your TV can support.
[ Wide Screen Format ] – de ne the
wide screen format for disc play.
Options Descriptions
[ Superwide ] Centre position of the
screen is stretched less
than the side. This
setting is only applicable
if the video resolution is
set to 720p or 1080i/p.
[ 4:3 Pillar
Box ]
No stretching of the
picture. Black bars is
displayed on both sides
of the screen.
[ Off ] Picture will be displayed
according to the format
of the disc.
Note
This setting is only available if you have set the
[ TV Display ] setting to [ 16:9 Wide Screen ].
[ HDMI Video ] – select a video
resolution that is compatible with your
TV display capability.
Options Descriptions
[ Auto ] It detects and selects the
best supported video
resolution automatically.
[ 480p, 576p,
720p, 1080i,
1080p ]
Select a video resolution
that best supported by
your TV. See your TVs
manual for details.
Note
If the setting is not compatible with your TV, a
blank screen appears. Wait for 15 seconds for auto
recover or switch to its default mode as follows:
1) Press Z. 2) Press b. 3) Press ZOOM.
[ EasyLink ] – enable all the HDMI CEC
compliant TV/device response or react
to certain commands simultaneously
with one touch control.
Options Descriptions
[ Auto
Wake-up TV ]
It wake-ups your TV
automatically when you
press PLAY to power up
this unit and start disc
play (if a video disc is
found in the disc
compartment).
To disable this feature,
select [ Off ]
.
[ System
Standby ]
Respond to standby
command from other
HDMI CEC compliant
TV/devices.
To disable this feature,
select [ Decline ].
1_hts3565-69_98_eng5_Final808.in40 401_hts3565-69_98_eng5_Final808.in40 40 2008-02-19 3:42:12 PM2008-02-19 3:42:12 PM

Related product manuals