20
Listen to music
1 Dock your iPod or iPhone (see ‘Dock your
iPod or iPhone’ on page 20 ).
2 Press DOCK for iPod on the home theater
remote control.
» The playlists are displayed on the TV.
3 Press the Navigation buttons and OK to
select and play tracks.
Watch video or view slideshows
Note
• On iPod, enable the TV ON setting.
• On iPhone, select the TV Out option.
1 Dock your iPod or iPhone (see ‘Dock your
iPod or iPhone’ on page 20 ).
2 Switch the TV to the AV/VIDEO source
(corresponding to the yellow composite cable).
» The TV screen goes blank.
3 Browse on the iPod or iPhone screen to
select videos or photos.
4 Press ( Play) to play the video and photos.
» The picture is displayed on the TV.
Use Philips EasyLink
The home theater supports Philips EasyLink,
which uses the HDMI CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI connectors can be controlled by a single
remote control.
Note
• Philips does not guarantee 100%
interoperability with all HDMI CEC devices.
1 Switch on the HDMI CEC operations on
the TV and other connected devices. See
the manual of the TV or other devices for
details.
2 Press ( Home).
3 Select [Setup], then press OK.
Play audio from TV or other
devices
Press SOURCE / AUDIO SOURCE repeatedly
to select the audio output of the connected
device .
Play from an MP3 player
Connect and play audio fi les from an MP3 player
or other external audio devices.
1 Connect the MP3 player to the home
theater as described in the Quick start
guide.
2 Press SOURCE / AUDIO SOURCE
repeatedly until ‘ MP3 LINK’ appears on the
display panel.
3 Press the buttons on the MP3 player to
select and play audio fi les.
Play from an iPod or iPhone
By connecting and installing a Philips Dock for
iPod/iPhone, you can use the home theater to
play music, movies and photos from your iPod or
iPhone.
Note
• Philips Dock for iPod/iPhone is sold separately.
• You can charge your iPod/iPhone on the dock
while the home theater is in iPod mode.
Dock your iPod or iPhone
1 Connect the dock to the home theater and
connect the yellow composite cable from
the dock to the TV. For more information,
see the Quick Start provided with the dock.
2 Switch on the iPod or iPhone and place it in
the dock.
3 On the home theater remote control, press
( Home), then select [browse iPod] and
press OK.
EN
To Next Page
Loading...
