Philips HTS9140 - Audio Settings and Sound Modes; Sound Mode Selection; Surround Sound Mode Adjustment

14
Change sound mode
Select predened sound modes to suit your
video or music.
1 Press SOUND SETTINGS / (Sound
options).
2 Select SOUND, then press OK.
3 Press the Navigation buttons (up/down) to
select the following settings:
• ACTION/ROCK : Enhanced low and
high-range. Ideal for action movies and
rock or pop music.
• DRAMA/JAZZ : Clear mid and high-
range. Ideal for drama movies and jazz
music.
• GAMING/PARTY : Moderate low-
range and strong mid-range. Ideal for
video games and party.
• CONCERT/CLASSIC : Neutral sound.
Ideal for live concerts and classical
music.
• SPORTS : Moderate mid-range and
surround effects for clear vocals and
the atmosphere of a live sport venue.
• NEWS : Enhanced mid-range for clear
vocals and speech.
4 Press OK to conrm your choice.
Change surround sound mode
Experience an immersive audio experience with
surround sound modes.
1 Press SOUND SETTINGS / (Sound
options).
2 Select SURROUND, then press OK.
3 Press the Navigation buttons (up/down) to
select the following settings:
• AUTO : Surround sound output based
on the audio stream.
• STEREO : Two-channel stereo sound.
Ideal for listening to music.
• AMBISOUND : Stereo sound output
or multi-channel surround output.
4 Press OK to conrm your choice.
Choose your sound
This section helps you choose the ideal sound for
your video or music.
1 Press SOUND SETTINGS / (Sound
options).
2 Press the Navigation buttons (left/right) to
access the sound options.
Sound
experience
Description
AUTO
VOLUME
Sets a constant output signal at
the speaker output. This option
is best for TV audio input
where the commercial signal
level is usually higher than the
content.
SOUND Selects a sound mode.
SURROUND Selects a surround sound or
stereo sound.
TREBLE Adjusts the high frequency
output.
MID Adjusts the middle frequency
output.
BASS Adjusts the low frequency
output.
AUDIO SYNC Delays the audio to match the
video.
3 Select an option, then press OK.
4 Press BACK to exit.
If you do not press a button within ve
seconds, it automatically exits the menu.
Change auto volume
Select the level of volume which output from
your TV or other devices to the home theater.
1 Press SOUND SETTINGS / (Sound
options).
2 Select AUTO VOLUME, then press OK.
3 Press the Navigation buttons (up/down) to
select ON or OFF.
4 Press OK to conrm your choice.
EN