Philips HTS9140 - USB Software Update; Technical Product Specifications; Supported Playback Media; Supported File Formats

25
8 Product specifications
Note
• Specication and design are subject to change
without notice.
Region code
The type plate on the back or bottom of the
home theater shows which regions it supports
Playback media
• AVCHD, BD-RE, BD-Video, DVD-Video,
DVD+R/+RW, DVD-R/-RW, DVD+R/-R
DL, CD-R/CD-RW, Audio CD, Video CD/
SVCD, Picture CD, MP3-CD, WMA-CD,
DivX (Ultra)-CD, USB storage device
File Format
• Audio: .mp3, .wma, .wav
• Video: .avi, .divx, .mkv, .wmv
• Picture: .jpg, .gif, .png
• Amplier
• Total output power: 500W RMS, 10% THD
• Frequency response: 40 Hz-20 kHz / ±3dB
• Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
• Input sensitivity:
• AUX: 1500 mV
• MP3 LINK: 750 mV
Country
DVD BD
Europe,
United Kingdom
Korea
Latin America
Australia,
New Zealand
Russia, India
China
AA
AA
CC
CC
Asia Pacific, Taiwan,
Update software from a USB
1 Check for the latest software version on
www.philips.com/support.
• Search for your model and click on
‘software and drivers’.
2 Create a folder named ‘UPG’ in the root
directory of your USB storage device.
3 Download the software into the ‘\UPG’
folder of the USB storage device.
4 Unzip the software in the ‘\UPG’ folder.
5 Connect the USB storage device to the
home theater.
6 Press (Home) and select [Setup].
7 Select [Advanced] > [Software Update] >
[USB].
8 Follow the instructions on the TV to
conrm the update.
» When complete, the home theater
automatically switches off and restarts.
• If not, disconnect the power cord for a
few seconds and then reconnect it.
Caution
• Do not turn off the power or remove the USB
storage device when the software update is in
progress because you might damage the home
theater.
English
EN