EasyManua.ls Logo

Philips HU4804 - 4 Using the Humidifier; Humidity Indication; Automatic Shut-Off; Turning the Humidifier on and off

Philips HU4804
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
EN
Note
In sleep mode, the red indicator does
not blink, it turns on when the water
level is low.
Turning the humidier on
and o
1 Put the plug of the humidier into
the wall outlet.
2 Press the power button to turn on
the humidier (g. j).
» The humidity indicator light is on.
3 Press the power button to turn o
the humidier.
Note
The humidier releases very ne invisible
mist, so it is normal that you cannot see
the mist.
If the water level in the reservoir is
getting very low, the humidier stops
humidifying. The red indicator light rst
starts blinking and then remains on.
Changing the fan speed
Manual
You can manually select the desired fan
speed.
1 Press the speed button one or
more times to select the desired
fan speed ( (low), or (normal))
(g. k).
» The selected fan speed light
goes on.
4 Using the
humidifier
Humidity indication
The humidier is equipped with a
built-in smart humidity control sensor.
You can set the target humidity level
at 40%RH, 50%RH and 60%RH. When
the desired humidity level is reached,
the color of the humidity indicator light
is blue. When the humidity level is not
reached, the humidity indicator light is
red.
Note
A comfortable humidity level is from
40RH% to 60RH%.
The accuracy of the humidity indication
is approximately ±10%.
It takes some time to measure the
humidity level in the room.
The humidity indicator light automatically
goes on when the humidier is switched
on.
Automatic shut-o
The automatic shut-o gives you a
timely warning when the reservoir needs
relling. When the water in the reservoir
starts getting low, a red indicator on
the control panel starts blinking to tell
you that it is time to rell the reservoir
(g. i). It blinks for 30 minutes. After
that, the indicator remains on before the
reservoir is relled with water.
When the reservoir is empty and
needs to be relled, the humidier
automatically shuts o and a red
indicator light turns on. When you
rell the reservoir, the humidier
automatically turns on again.

Related product manuals