41
ENGLISH
41
2
Remove the Cappuccinatore from the hot water/steam wand.
3
Remove the “INTENZA+” water lter from the water tank if it was instal-
led.
4
Press the “ ” button. Press the “ ” button until the following
display is shown.
Yellow
Red
5
Press the “ ” button to enter the descaling menu.
Note:
If you press the “
” button by mistake, press the “ ” button to quit.
6
Remove the water tank and pour the entire content of the Saeco decal-
ci er. Then ll the water tank with fresh water up to the MAX level.
7
Place the water tank back into the machine.
8
Place a large container (1.5L) under both the steam/hot water wand
and the dispensing spout.
To Next Page
Loading...
