Philips iPlayer3 User Manual

PRESETS
1
2
3
4
x
5
iPLAYER3
iPlayer3
Installation Instructions
Instructions d’installation
Installationsanweisungen
Instrucciones de instalación
Istruzioni per l’installazione
Installatie-instructies
インストール手順
安装指示
A
Must be installed by a qualified electrician in
accordance with all national and local electrical and
construction codes and regulations.
Doit être installé par un électricien qualifié conformément aux codes et
réglementations électriques nationaux et locaux du bâtiment.
Muss von einem geprüften Elektriker in Übereinstimmung mit allen
nationalen und örtlichen elektrischen Codes und Regelungen installiert
werden.
La instalación debe realizarla un electricista calificado siguiendo todos
los códigos y normativas eléctricas y de construcción, tanto nacionales
como locales.
Devono essere installati da un elettricista qualificato in conformità con
le norme locali e nazionali vigenti in materia di costruzioni edilizie e
installazione di impianti elettrici.
Moet door een gekwalificeerd elektricien overeenkomstig alle nationale en
lokale elektrische verordeningen worden geïnstalleerd.
国または地域の建築コードおよび規制にすべて従い、資格のある電
気技師が設置してください。
必须根据所有国家和地方的电气和施工准则及规范，由符合资格的
电工进行安装。
E www.colorkinetics.com/support
PUB-000205-00 R03
Install optional mounting bracket
Installez le support de montage facultatif
Montieren Sie die optionale Haltevorrichtung
Instale el soporte de montaje opcional
Installare la staffa di montaggio opzionale
Installeer de optionele montagesteun
取り付けブラケットの 装着（オプション）
装配可选的安装支架
Confirm all components received
Confirmez la réception de l’intégralité des composants
Bestätigen Sie, dass Sie alle Bestandteile erhalten haben
Compruebe si ha recibido todos los componentes
Confermare tutti i componenti ricevuti
Controleer alle ontvangen componenten
すべてのコンポーネントが揃っていることを確認します。
确认收到了所有部件
iPLAYER3
PRESETS
2
1
3
4
5
x
POWER
USB
DMX 2
DMX 1
SERIAL 2
SERIAL 1
Slide into mounting bracket
Faites glisser dans le support de montage
Schieben Sie das Gerät in die Haltevorrichtung
Deslice hacia el soporte de montaje
Far scorrere nella staffa di montaggio
Schuif in de bevestigingssteun
マウントブラケットにスライドさせます。
滑入安装支架
USB DMX

Philips iPlayer3 Specifications

General

Brand	Philips
Model	iPlayer3
Category	Controller
Language	English

Summary

Electrical Safety and Installation Requirements

Qualified Electrician Installation

Device must be installed by a qualified electrician according to all national and local codes.

Step 1: Confirm Components

Confirm all components received

Verify receipt of all components before starting the installation process.

Step 2: Install Mounting Bracket

Install optional mounting bracket

Install the optional mounting bracket for proper device placement.

Step 3: Mount Device

Slide into mounting bracket

Slide the device into the mounting bracket to secure it.

Step 4: Attach Power Cable

Attach power cable

Connect the power cable to the device for operation.

Step 5: Install Software

Download and Install ColorPlay 3 Software

Download and install the ColorPlay 3 software from the provided URL.

Step 6: Connect Computer

Connect computer with USB cable

Connect the computer to the device using a USB cable.

Step 7: Attach Additional Devices

Attach additional devices as required

Connect any additional devices as needed to the system.

Step 8: Connect Lighting Systems

Connect lighting systems with DMX cable

Connect lighting systems to the device using DMX cables.

Step 9: Configure Device

Configure with iPlayer 3 / ColorPlay 3

Configure the device using the iPlayer 3 or ColorPlay 3 software.

General Safety Warnings

Read Instructions Before Use

Do not attempt to install or use until you read and understand all instructions and safety labels.

Avoid Damaged Housing or Cables

Do not use if the product housing or power cables are damaged.

Use Specified Voltage and Current

Do not use any voltage or current the product is not rated for.

Verify Power is Off

Verify power is off before installing or de-installing the product.