Do you have a question about the Philips LC7.1E and is the answer not in the manual?
Details display type, screen size, resolution, contrast, light output, response time, viewing angle, tuning, color systems, video playback, computer formats, video formats, presets, tuner bands.
Details side and rear I/O connections, including EXT3, EXT1, EXT2, HDMI1/2, S-VIDEO, VIDEO, AUDIO IN, SERV C/U.
Provides an overview of the chassis, showing the location of major components like the power supply unit and small signal board.
Outlines essential safety regulations for repair, isolation transformer use, component substitution, and post-repair checks.
Provides schematic notes on resistor and capacitor value notation, and handling of BGA ICs.
Illustrates cable routing and management within the set, applicable to 32" models.
Details procedures for removing the rear cover and accessing internal components.
Provides instructions for reassembling the set, emphasizing cable placement and EMC foam mounting.
Introduces Service Default Mode (SDM), Alignment Mode (SAM), Customer Mode (CSM), and ComPair for diagnostics.
Explains the purpose of error codes, how they are stored in the NVM, and how to read the error buffer.
Details the procedure for displaying errors using the front LED blinking codes, especially when OSD is not working.
Shows the wiring diagram for 32" LCD models, illustrating interconnections between major modules.
Illustrates the video signal flow, including tuner, demodulator, video processor, and various input/output connections.
Shows the audio signal path, including tuner, demodulator, sound processor, amplifier, and various input/output connections.
Shows the circuit diagram and PWB layout for the DC/DC conversion section of the SSB.
Provides the circuit diagram and PWB layout for the tuner and demodulator section (B03A).
Shows the circuit diagram and PWB layout for the video processor (B04B).
Shows the circuit diagram and PWB layout for the audio processor (B04C).
Outlines electrical conditions required for alignment, including power supply, warm-up time, and test probe specifications.
Describes software alignment procedures for Tuner (RF AGC) and RGB (White Tone).
Explains how to set option codes for microprocessor communication with I2C ICs and function configuration.
Describes the PSU as a buy-in black-box, lists PSU types used, and shows connectivity and voltage outputs.
Discusses tuner diversity based on region and the video IF amplifier, including SAW filter diversity.
Introduces HDMI, its capabilities, and the implementation using the Sil9025 IC.
Provides an alphabetical list of abbreviations used in the manual, with their meanings.
Introduces IC data sheets and shows the block diagram and pin configuration for the SIL9025CTU HDMI receiver.
Lists spare parts categorized by model number (CTN) for different TV sets and includes component details.