Philips Lumea Advanced User Manual

Note: If you notice a skin tone has changed since the last treatment
(e.g. due to tanning), we recommend that you perform a skin test
and to wait 30 minutes before your next treatment.
To prevent damage
-
Make sure that nothing obstructs the airflow through the
ventilation slots of the device.
-
Never subject the device to heavy shocks and do not shake or
drop it.
-
If you take the device from a very cold environment to a very warm
environment or vice versa, wait approximately 3 hours before you
use it.
-
Store the device in a dust free and dry place.
-
Do not expose the device to temperatures lower than 15°C or
higher than 35°C during use.
-
To prevent damage, do not expose the device to direct sunlight or
UV light for several hours.
Caution
-
This device is only intended for removing unwanted body hair
from areas below the cheekbone. Do not use it for any other
purpose. Doing so may expose you to a hazardous situation. Men
most not use it on the face and neck including all beard-growing
areas and the whole genital area.
-
This device is not washable. Never immerse the device in water
and do not rinse it under the tap.
-
For hygienic reasons, the device should only be used by one
person.
-
Use the device only at settings suitable for your skin type. Use at
higher settings than those recommended can increase the risk of
skin reactions and side effects.
11
English

Philips Lumea Advanced Specifications

General

Body Attachment	Yes
Facial Attachment	Yes
Precision Attachment	Yes
Skin Tone Sensor	Yes
Slide and Flash Mode	Yes
Stamp Mode	Yes
High Performance Lamp	Yes
Integrated UV Filter	Yes
Voltage	100-240 V
Technology	IPL
Light Intensity Settings	5
Application Areas	Body, Face, Bikini
Body Attachment Size	3 cm²
Face Attachment Size	2 cm2
Bikini Attachment Size	3 cm2
Treatment Time Half Lower Leg	15 min
Skin Tone Compatibility	I, II, III, IV
Hair Color Compatibility	Brown, Black
Treatment Areas	Bikini line, Body, Face
Weight	Unknown
Warranty	2 years