Philips Lumea Advanced User Manual

To remove the attachment, pull it off the light exit window.
Selecting the right light intensity
Lumea provides 5 different light intensities. Depending on your skin type
and the light intensity level you find comfortable, you can select the right
light intensity setting.
1 Consult the table below to select the right setting.
2 To adjust the light intensity setting, press the on/off button one or more
times until you have reached the required setting. The corresponding
intensity light lights up white.
3 Lumea should never be painful. If you experience discomfort, reduce the
light intensity setting.
4 After recent tanning, perform a skin test to determine the right light
intensity setting.
Skin type
Skin tone Light intensity setting
I White; You always sunburn,
never tan.
4/5
II Beige; You easily sunburn, tan
minimally.
4/5
III Light brown; You sunburn easily,
tan slowly to light brown.
4/5
IV Mid brown; You rarely sunburn,
tan easily.
3/4
V Dark brown; You rarely sunburn,
tan very easily.
You cannot use the device
VI
Brownish black or darker; You
rarely or never sunburn, very
dark tanning.
You cannot use the device
Note: To check if your skin type allows usage of the device, consult the skin
tone table with number 2 on the foldout page.
16
English

Philips Lumea Advanced Specifications

General

Body Attachment	Yes
Facial Attachment	Yes
Precision Attachment	Yes
Skin Tone Sensor	Yes
Slide and Flash Mode	Yes
Stamp Mode	Yes
High Performance Lamp	Yes
Integrated UV Filter	Yes
Voltage	100-240 V
Technology	IPL
Light Intensity Settings	5
Application Areas	Body, Face, Bikini
Body Attachment Size	3 cm²
Face Attachment Size	2 cm2
Bikini Attachment Size	3 cm2
Treatment Time Half Lower Leg	15 min
Skin Tone Compatibility	I, II, III, IV
Hair Color Compatibility	Brown, Black
Treatment Areas	Bikini line, Body, Face
Weight	Unknown
Warranty	2 years