34
English
3139 115 22612
IMPORTANT!
– Make sure the FM and MW
antennas are connected.
Tuning to radio stations
1 Press TUNER on the remote (or press
SOURCE control on front panel) to
select “FM” or “MW”.
2 Press 3 / 4 briefly on the remote.
➜ "SEARCH" appears.
➜ The next radio station will tune
automatically.
3 To tune a weak station, press S / T
briefly and repeatedly until an optimal
reception is found.
Presetting radio stations
You can store up to 20 FM and 10 MW
preset radio stations in the memory.
Helpful Hints:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA"
appears.
Using the Plug and Play
Plug and Play allows you to store all
available radio stations automatically.
1 For first time setup, on the DVD system
press SOURCE or TUNER to select
TUNER mode,
"AUTO INSTALL PRESS PLAY"
appears.
2 Press ÉÅ on the front panel to start
installation.
➜ "INSTALL TUNER" appears.
➜ All previously stored radio stations will
be replaced.
➜ Once completed, the last tuned radio
station will play.
➜ FM followed by MW bands will be
stored.
Tuner Operations
001-041-LX36-22-Eng 21/08/2003, 9:44 AM34
To Next Page
Loading...
Need help?
General
