3 - 4
CONNECTION AND CONTROLS
Controls
Controls
Controls on the system
1 DBB
– enables or disables bass enhancement.
2 DSC
– selects different types of preset sound equalizer
settings.
3 TUNING
à
/
á
Tuner .................... searches for a radio station
Disc ....................... fast searches backward/forward
in a disc at different speeds.
4
ECO POWER/STANDBY-ON
B
– switches the system on or to Eco-power standby
/normal standby mode.
5
ÉÅ
Disc ....................... starts or interrupts disc playback
Tuner .................... activates the plug and play
function
SOURCE
– selects the respective sound source: DISC, USB,
TUNER (FM), or AUX.
¡ / ™
Disc ....................... press to skip to the previous/
next chapter/title/track.
Tuner .................... selects a preset radio station
9
– stops disc playback or erases a program.
6
iR Sensor
– point the remote control towards this sensor.
7 OPEN/CLOSE
– opens or closes the disc door.
8 PROGRAM
Tuner .................... program the favourite stations.
Tuner. .................... press and hold to start automatic
preset programming.
Disc/USB ............ program the favourite tracks.
9 MODE
– selects various repeat/shuffle play modes (For
VCD with PBC feature, PBC must be turned off.)
0 VOLUME +/-
– adjusts the volume upward/downward.
Clock
– sets the clock time
!
Display
– shows the current status of the DVD player.
@
USB DIRECT
– jack for the external USB mass storage device.
Controls on the remote control
1 y
– to switch the system on or to Eco-power
standby/normal standby mode.
2 Numeric Keypad (0-9)
– inputs a track/title/chapter number of the disc.
3 PROG/ANGLE
–V
CD/CD/MP3-CD: enters the program menu.
–T
uner: programs preset radio stations.
–D
VD: selects a DVD camera angle.
4 SOURCE
–
to select the respective sound source: DISC
USB, TUNER or AUX.
5 SYSTEM MENU (disc mode only)
–
to enter or exit the system menu bar.
6 DISC MENU (disc mode only)
–DVD/VCD: enters or exits the disc contents
menu.
– VCD2.0: switches the playback control mode on
or off .
7
22/33
Tuner
– press to tune to a lower/higher radio frequency
gradually.
– press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
Disc
–moves an enlarged picture left/right.
– (not for MP3 CD) searches backward/forward in
a disc at different speeds.
– In DISC mode, to select a movement direction in
the disc menu or system menu bar.
Picture CD
– rotates a picture clockwise or counterclockwise.
8
3/4
–moves an enlarged picture up/down.
– In DISC mode, to select a movement direction in
the disc menu or system menu bar.
3
– selects different slow backward playback modes
for DVD.
4
– selects different slow forward playback modes
for DVD.
9 OK
– to exit or confirm the selection.
0 í/ë
– Disc: skips to the previous/next chapter/title/
track.
–Tuner: selects a preset radio station.
! 9
– In DISC mode, to stop playback or clear a
program.
@
2;
– In DISC mode, to start or interrupt playback.
– In TUNER mode, to activate the plug and play
function.
# VOL +/-
– adjusts the volume upward/downward.
– adjusts the hours and minutes in clock/timer
setting mode.
$ MODE
–to select various repeat modes or the shuffle
play mode for a disc.
% SUBTITLE
– selects a subtitle language.
^
SLEEP/TIMER
Standby mode
*– sets a time for switching on the system
automatically.
Power-on mode
– sets the sleep timer function (auto-off).
&
LOUD/DBB
– enables or disables automatic loudness
adjustment.
*– enables or disables bass enhancement.
* DSC
– selects different types of preset sound equalizer
settings (ROCK, JAZZ, POP, CLASSIC, or OFF).
( MUTE
– to interrupt or resume sound reproduction.
)
DISPLAY/CLOCK
for disc
– displays the disc information on the TV screen.
for clock
*– sets the system clock.
¡ REPEAT A-B
– for VCD/CD: to repeat a specific section within
the same track.
– for DVD: to repeat a specific section in a disc.
™ AUDIO
for VCD
– sets Stereo, Mono-Left or Mono-Right sound
mode.
for DVD
– selects an audio language.
£ ZOOM
–DVD/VCD/Picture CD: enlarges or reduces a
picture or active image on the TV screen.
≤ GOTO
–
In DISC mode, to fast search in a disc by
entering a time, title, chapter or track.
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (DISC or
TUNER, for example).
– Then select the desired function ( 2;, í,
ë for example).
To Next Page
Loading...
