Philips MCD183/55 - 9 Additional Features; Demonstration Mode and Display Brightness; Alarm and Sleep Timers; Connecting and Listening to Audio Players

26
To deactivate the alarm timer, select »
[OFF] (off) at step 6.
Set the sleep timer
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of
time (in minutes).
The unit turns off automatically after »
the set period of time.
Connect other devices
Listen to an audio player
You can listen to audio player through this unit.
1 Connect the audio player.
For audio players with red/white •
audio output sockets:
Connect a red/white audio cable (not
supplied) to the AUX IN L/R sockets
and to the audio output sockets on
the audio player.
9 Other features
Activate demonstration mode
You can see an overview of all features.
1 In standby mode, press on the main unit
to activate the demonstration mode.
A demonstration of major available »
features starts.
To deactivate the demonstration mode:
1 Press on the main unit again.
Adjust brightness of display
panel
1
In standby mode, press MODE/DIM
repeatedly to select different levels of
brightness for the display panel.
Set the alarm timer
1
Ensure that you have set the clock
correctly .
2 In standby mode, press and hold SLEEP/
TIMER.
The hour digits are displayed and begin »
to blink.
3 Press + VOL - to set the hour.
The minute digits are displayed and »
begin to blink.
4 Press + VOL - to set the minute.
5 Press SLEEP/TIMER to confi rm.
6 To activate the wake-up timer, press + VOL
- to select [ON] (on).
A clock icon appears on the display.»
The unit turns on automatically at »
the set time and switches to the last
selected source.
EN