Controls
6 DISC MENU (disc mode only)
– to start playback at any chosen time on the disc
(for VCD operation with PBC off).
7 22/33
Tuner
– press to tune to a lower/higher radio frequency
gradually.
– press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
Disc
– searches backward/forward in a disc at different
speeds.
8 3/4
4
– In DISC mode, to select a movement direction in
the disc menu or system menu bar.
9 OK
– to exit or confirm the selection.
0
– Disc: skips to the previous/next chapter/title/
track.
–Tuner: selects a preset radio station.
! STOP 9
– In DISC mode, to stop playback or clear a
program.
@ PLAY/PAUSE 2;
2;
– In DISC mode, to start or interrupt playback.
# VOL +/-
– adjusts the volume upward/downward.
– adjusts the hours and minutes in clock/timer
setting mode.
– switches the set timer ON or OFF.
$ REPEAT
– to repeat a track/disc.
% SUBTITLE
– selects a subtitle language.
^ SLEEP
– to set the sleep (auto-off) timer function.
& LOUDNESS
– enables or disables automatic loudness
adjustment.
* DSC
– selects different types of preset sound equalizer
settings (CLASSIC, JAZZ, POP or ROCK).
( DBB
– enables or disables bass enhancement.
) MUTE
– to interrupt or resume sound reproduction.
¡ DISPLAY (OSD)
– displays information on TV screen during
playback.
– FM: to set stereo or mono sound mode.
™ SLOW
– selects different slow playback modes for a VCD/
SVCD/DVD.
£ SHUFFLE
– to repeat playback of all tracks in a random
order.
REPEAT A-B
–for CD: to repeat a specific section within the
same track.
–for DVD/VCD: to repeat a specific section in a
disc.
AUDIO
for VCD
– sets Stereo, Mono-Left or Mono-Right sound
mode.
for DVD
– selects an audio language.
§ TIMER
*– to set the timer.
ZOOM
–DVD/VCD/Picture CD: enlarges or reduces a
picture or active image on the TV screen.
• ANGLE
– selects a DVD camera angle.
ª GOTO
– In DISC mode, to fast search in a disc by
entering a time, title, chapter or track.
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (VCD/ CD or
TUNER, for example).
– Then select the desired function (
for example).
* = Press and hold the button for more than three seconds.
3
/
4
3
Controls
Controls on the system
1
STANDBY ON y
– switches the system to standby/on.
2 iR sensor
– infrared sensor for remote control.
3 CLOCK
Standby mode
*– sets the system clock.
Playback mode
– displays the system clock.
4 PROGRAM
–DVD/VCD/CD/MP3-CD: enters the program
menu.
– Picture CD: during playback, to select a slide
show mode.
–Tuner: programs preset radio stations.
5 DISPLAY/ST
– Disc: to select disc information display mode.
–FM: to set stereo or mono sound mode.
6 Mode Selection
STOP 9
9
............ In DISC mode, to stop playback
or clear a program.
PLAY/PAUSE
................................. In DISC mode, to start or
interrupt playback.
PRESET
Disc: skips to the previous/next chapter/title/
track.
Tuner: selects a preset radio station.
TUNING 22/33
Tuner
– press to tune to a lower/higher radio frequency
gradually.
– press and hold, then release the key to start
automatic search for a radio frequency
downward/upward.
Disc
– searches fast backward/forward in a disc.
7 Display screen
– to view the current status of the system.
8 SOURCE
– to select the respective sound source : DISC
TUNER, TAPE or AUX.
9 LOUDNESS
– enables or disables automatic loudness
adjustment.
0 DBB
– enables or disables bass enhancement.
! DSC
– selects different types of preset sound equalizer
settings (CLASSIC, JAZZ, POP or ROCK).
@ VOLUME
– adjusts the volume upward/downward.
– adjusts the hours and minutes in clock/timer
setting mode.
– in timer setting mode, switches the set timer ON
or OFF.
# n
– to connect a headphone.
$ OPEN•CLOSE
– to open or close the disc door.
% Ta pe Deck Operation
RECORD
... starts recording.
PLAY 2
2
............ starts playback.
SEARCH fast rewinds/winds the tape.
STOP•OPEN 0
................................. stops tape playback/recording;
opens the tape compartment.
PAUSE ....... interrupts recording or playback.
Controls on the remote control
1
y
– switches the system on/off.
2 Numeric Keypad (0-9)
– inputs a track/title/chapter number of the disc.
– inputs the number of a preset radio station.
3 PROGRAM
–DVD/VCD/CD/MP3-CD: enters the program
menu.
– Picture CD: during playback, to select a slide
show mode.
–Tuner: programs preset radio stations.
4 SOURCE
– to select the respective sound source : DISC
TUNER, TAPE or AUX.
5 SYSTEM MENU (disc mode only)
– to enter or exit the system menu bar.
* = Press and hold the button for more than three seconds.
4
3
/
2;
2
2
2
2
;
/
To Next Page
Loading...
